Fusion Splicer Ilsintech KF-4

  • BrandsIlsintech
  • Product Code: FUSION SPLICER
  • Availability: Pre-Order

  • Rp37,500,000

CV. INDOTELECOM : Supplier Fusion Splicer ILSINTECH KF4/KF-4, Splicing Machine ILSINTECH K11ILSINTECH KF4 Fusion Splicer & ILSINTECH KR7 dengan harga yang kompetitif di Pasaran, barang ORIGINAL & Bergaransi RESMI.

Fusion Splicer Ilsintech Swift KF4 is a very flexible and super accurate splicing machine that meets every aspect of connection requirements. At an affordable price and very light.

Features :
Compact, Lightweight and Convenient
▶ Best Active Cladding Alignment fusion splicer with slim and light form factor
l Size : 124(W) × 189(L) × 75(H) mm l Weight : 1.1 kg (Including battery)
l Splicing time : 7 sec l Heating : 13 sec (IS-60 mode, IS-60 sleeve)
▶ With Work Table, maximizing the work efficiency.
Resistance to Shock, Dust and Water
▶ The splicer with high reliability has stable performance even in a harsh environment.
l Shock – Free Fall : 76cm l Waterproof : IPx2 l Dustproof : IP5x
Resistance Wide LCD : 4.3 Inch
▶ Heater Crystal clear and wide 4.3″ LCD.


Fiber alignmentActive Clad to Clad Alignment
Applicable type of fibers
0.25mm, 0.9mm, 2.0mm, 3.0mm, Indoor cable
Fiber countSingle fiber
Applicable fiber dimensionsCladding diameter: 125㎛ / Coating diameter: 150㎛~3mm
Fiber setting and cleaved length
5mm to 16mm
Splicing modesSplice mode: 300, Heater mode:100
Typical Splice LossSM: 0.02dB, MM: 0.01dB, DS: 0.04dB, NZDS: 0.04dB
Return loss> 60dB
Splicing TimeTypical 7sec With SM
Splice loss estimateAvailable
Sleeve heating timeTypical 13sec with IS-60 mode, IS-60 sleeve
Applicable protection sleeve40mm,60mm and micro sleeves
Storage of splice resultDate : Up to 5,000 (Image: Up to 5,000 pec)
Tension test
1.96N to 2.25N
Operating condition
Altitude: 5,000m above sea level, Temperature: -10℃~50℃, Humidity: 0~95%,
Wind: 15m/s, non-condensing, dust proof, water proof, shock proof
Storage condition
Temperature: -40℃~80℃, Humidity: 0~95%
124(W)x189(L)x75(H)mm(Without rubber protector)
Weight1.1kg(Including battery)
Viewing method and displayTwo CMOS cameras and 4,3-inch color LCD monitor
Fiber view and magnificationX/Y : 130X MAX:260X
Power supplyLi-ion Battery(DC 14.8V, 3400mAh), 100 ~ 240V AC Charger
No.of splice cycles with battery
Typical 200 cycles
Electrode lifetimeMore than 21,000 times
Blade lifetime75,000 cleaves



Write a review

Note: HTML is not translated!
    Bad           Good

Tags: Fusion Splicer Ilsintech KF-4, Fusion Splicer, Ilsintech