Fusion Splicer Ilsintech KF-4A

  • BrandsIlsintech
  • Product Code: FUSION SPLICER
  • Availability: Pre-Order

  • Rp44,750,000

CV. INDOTELECOM : Supplier Fusion Splicer ILSINTECH SWIFT KF4A/KF-4A, Splicing Machine ILSINTECH SWIFTK11ILSINTECH KF4 Fusion Splicer & ILSINTECH KR7 dengan harga yang kompetitif di Pasaran, barang ORIGINAL & Bergaransi RESMI.

Swift KF4A is the highly advanced and accurate ACTIVE cladding alignment fusion splicer, which has been designed to perform the major 5 multifunctional features systematically : stripping, cleaning, cleaving, splicing and sleeving.In addition, optional Optical Power Meter and V.F.L(Visual Fault Locator) is imbedded in the machine. They allow users check the splice result immediately without additional tools. (ALLINONE+, KF4A+) The Swift KF4A is best fit for fusion splicing and fusion Splice-On Connector(SOC) of FTTx network applications, which eliminates fatal issues with conventional mechanical connectors.(low quality, weak durability and high maintenance cost). Swift KF4A+fusion Splice-On-Connector gives our customer the best ROI.

     ▶ No scratches from heated stripping
     ▶ Stripping time : 1.5sec
     ▶ Over 5kg/f Tensile Strength of fiber
       after stripping
     ▶ One-touch pump
     ▶ Easy to refill cleaning  
     ▶ Single-action cleaving
     ▶ Fiber chip collector attached
Built-in Power Meter and Fault Locator, Optional (PCT/KR2013/001243)
     ▶ Built-in two essential tools enable more efficient performance.
Resistance to Shock, Dust and Water
     ▶ The splicer with high reliability has stable performance even in a harsh environment.
      l Shock – Free Fall : 76cm from 5 sides l Waterproof : IPx2 l Dustproof : IP5x
Compatible with Fusion Splice-On Connector(SOC) in accordance with the Industrial Standard
Perfect Solution with Swift KF4A+ and Swift Connector
Swift Connector Assembly Sequence
Work Table



Fiber alignment

Active Clad to Clad Alignment

Applicable type of fibers

0.25mm, 0.9mm, 2.0mm, 3.0mm  Indoor cable

Fiber count

Single fiber

Applicable fiber dimensions

Cladding diameter : 125, Coating diameter : 150~3mm

Fiber setting and cleaved length

5mm to 16mm

Splicing modes

Splice mode: 300, Heater mode: 100

Typical Splice Loss

SM: 0.02dB, MM: 0.01dB, DS: 0.04dB, NZDS: 0.04dB

Return loss

> 60dB

Splicing time

Typical 7sec (with SM)

Splice loss estimate


Sleeve heating time

Typical 13sec, IS-60 mode with IS-20 sleeve

Applicable protection sleeve

40mm, 60mm and Micro sleeve

Storage of splice result

Data : Up to 5,000 (Image : Up to 5,000 pcs)

Tension test

1.96N to 2.25N

Operating condition

Altitude: 0~5,000m above sea level, Temperature: -10℃~50℃, Humidity: 0~95%,

Wind: 15m/s, non-condensing, dust proof, water proof, shock proof

Storage condition

Temperature: -40℃~80℃, Humidity: 0~95%




1.5kg(Including battery)

Viewing method and display

2AXIS Two CMOS cameras and 4.3-inch color LCD monitor

Fiber view and magnification

X/Y : 130X, Max : 260X

Power supply

DC Lithium polymer battery(DC 14.8V, 1650mAh2), 100 ~ 240V AC Adapter

No. of splice cycles with battery

Typical 200 cycles

Electrode lifetime

More than 21,000 times

Blade lifetime

75,000 fibers



Write a review

Note: HTML is not translated!
    Bad           Good

Tags: Fusion Splicer Ilsintech KF-4A, Fusion Splicer, Ilsintech