Fusion Splicer Ilsintech KR7

  • BrandsIlsintech
  • Product Code: FUSION SPLICER
  • Availability: Pre-Order

  • Rp67,500,000

CV. INDOTELECOM : Supplier Fusion Splicer ILSINTECH KR7, ILSINTECH K7 Splicer Machine, Splicing Machine ILSINTECH K11ILSINTECH KF4 Fusion Splicer & ILSINTECH KR7 dengan harga yang kompetitif di Pasaran, barang ORIGINAL & Bergaransi RESMI.

SWIFT KR7  for Ribbon Fiber

Swift KR7 is the advanced typical ribbon splicer that can proceed the maintenance via internet.And it can take user-friendly GUI for user convenience.


Internet remote access maintenance
User friendly GUI
Resistance to Shock, Dust and Water
     ▶ The splicer with high reliability has stable performance even in a harsh environment
      l Shock-Free Fall : 76cm from 5 sides l Waterproof : IPx2 l Dustproof : IP5x
Powerful Lithium Polymer Battery with Large Capacity
     ▶ Performs 200 cycles of fusion splicing and sleeve heating with the standard battery
4.3-inch Color LCD Monitor with Touch Screen
     ▶ Magnification : 20X, MAX 55X
     ▶ For user’s convenience, LCD monitor has been designed with touch screen in addition to the
       operation keys. 
Bidirectional Operation System
     ▶ For user’s ergonomic preference, the screen can be turned around for one’s chosen viewing direction. 
Equipped with Sleeve Loader to Prevent Contamination and to Provide Convenience
     ▶ While working in a manhole, the loader prevents the supplementary sleeve from falling and being
     ▶ Working in aerial space such as telephone pole, the loader also prevents the supplementary sleeve from
       falling down. 
Built-in Dual Sleeve Heater
     ▶ Productivity would be increased up to 30% due to a simple & user-friendly design.
     ▶ The dual-heater can work for both Fiber to Fiber and Fiber to Swift Connector.
     ▶ Detects the surrounding environment of temperature, humidity, air pressure and measures discharge
       calibration rate automatically. 

Fiber alignment
Ribbon to Ribbon Alignment
Applicable type of fibers
SM(ITU-T G.652), MM(ITU-T G.651), DS(ITU-T G.653), NZDS(ITU-T G.655)
Fiber count
Single fiber, 2~12 fiber
Applicable fiber dimensions
Single: Cladding diameter 125㎛, Coating diameter 250, 900㎛Ribbon: Cladding diameter 125㎛, Ribbon fiber thickness 0.25 to 0.40mm
Fiber setting and cleaved length
Splicing modes
Splice mode: 100, Heat mode: 100
Typical Splice Loss
SM: 0.05dB, MM: 0.02dB, DS: 0.08dB, NZDS: 0.08dB
Return Loss
> 60dB
Splicing Time
Typical 16sec with  standard SM(ITU-T G.652)
Splice loss estimate
Sleeve heating time
1~2 core 20sec, 4~12 core 50sec
Applicable protection sleeve
40mm, 60mm(fiber), Micro
Storage of splice result
The last 10,000 results to be stored in the internal memory.
(Image 10,000 results)
Tension test
Operating condition
Altitude: 0~5,000m above sea level, Temperature: -10℃~50℃, Humidity: 0~95%, Wind: 15m/s, non-condensing, dust proof, water proof, shock proof
Storage condition
Temperature: -40℃~80℃, Humidity: 0~95%
142(W) x163(L) x146(H)mm(Including rubber)
2.0kg(Including battery 2.5kg)
Viewing method and display
Two CMOS cameras and 4.3-inch color LCD monitor with touch screen
Fiber view and magnification
20X, MAX 55X
Power supply
DC Lithium polymer battery(DC 14.8V, 6000mAh), 100~240V AC Adapter
No. of splice cycles with battery
Electrode life
More than 1,500 times
USB, External Power(DC 12V Available for car cigar jack)DC Output 13.2~16.8V

Write a review

Note: HTML is not translated!
    Bad           Good

Tags: Fusion Splicer Ilsintech KR7, Fusion Splicer, Ilsintech